Screenshots

Description

Advanced field recorder combined with a sound warp engine and a collection of ready to use dynamic presets for iPad and iPhone. Discover new ways to create and construct unusual and exciting sounds from any environmental audio recordings or samples recorded from other apps through Inter-App audio or Audiobus.

The main advantage is that you can record and modify samples along the way within the single app. You can record sounds and noises, delete unwanted parts and then use presets to give a whole new sounding or create spectacular soundscapes and textures to use them as loops in this app. And even use FieldScaper as effect in real time with other apps or external input.

The FieldScaper consists of two main parts. The first part is the field recorder with special options for different ways of record environmental sound from microphone or record other sound sources. With the sample editor you can cut or split the source sample for more convenient use. The second part is the scaper sound engine that with using dynamic presets can easily transform the most ordinary sounds into something absolutely different. These parts connect with each other into one whole but you can use recorder or scaper independently.

The FieldScaper supports complete MIDI control for all faders, knobs and many buttons. You can change the parameters of oscillators, filters, delays and mixer by using any external MIDI controller or MIDI apps like sequencers. With the MIDI controllers this app becomes very comfortable to use at live performance.

Field recorder:

● Auto start record when input signal appears.
● Auto stop record when signal below threshold or by time.
● Record series of samples by a signal presence.
● Recorder timer in seconds or measure (sync with BPM).
● Input signal monitor with different modes.
● Automatic gain control, cut off input filters and noise gate.
● Advanced sample editor (delete, trim, split, cut, copy, paste, undo).
● Filter and normalizer for recorded sample.

Scaper sound engine:

● Loop based mode for processing input in real time as effect.
● Three sample-based oscillators, each with set of effects.
● Low-pass, high-pass, band-pass, band-stop filters with resonance.
● Two range delay with smooth time change and additional modes.
● Advanced spatial mixer / reverb with changing of side and distance.
● Three-band parametric equalizer for each oscillator.
● Wide range changing of oscillator speed with option of reverse.
● Distortion effect based on breaking addressing of samples (like on circuit bending).
● Complex effect contains lofi, overload, noise, ringmod, flanger, phaser.
● Step sequencer can control selected parameter and envelope generator (ADSR).
● Individual or group of LFO for each effect with additional modes and BPM sync.
● The "Main effect" function for control several parameters simultaneously.

Additional features:

● A set of predefined presets with wide range of effects.
● Scenes for storing and loading all operation parameters.
● Pack the scene and all its samples and presets to single file.
● Convenient file manager with groups of files by name or date.
● Access samples and records via standard iOS app "Files".
● Upload samples thru Dropbox, Web access, "Open in" and clipboard.
● Complete MIDI control for all faders, knobs and other modes.
● Adaptive UI for portrait and landscape orientation.
● Different color schemes available for UI.
● Detailed application description (built-in and PDF file).
● Inter-App audio compatible (with transport and BPM controls).
● Supports Audiobus 3 with "State Saving" and MIDI features.
● Supports Ableton Link with start / stop sync.

Requirements:

Third generation of iPad or fifth generation of iPhone and higher is required.

You can find more details about FieldScaper on the website:

http://motion-soundscape.blogspot.com

Overview and demo:

http://youtu.be/n9nQRN6xWGo
http://youtu.be/cCr5UPkdMY0
http://youtu.be/Kp88NkJpy2M

What's New

Version 2.0.2

Version 2.0.2 Bugfix: LFOs of Oscillator 3 doesn't work properly.

What's new in version 2.0:

With this update you can add rhythmic effects and distortions with using built-in step sequencer. The sequencer and LFOs can be synced with other apps and devices thru MIDI, Inter-App Audio or with Ableton Link. New parametric equalizer can isolate or suppress oscillators output in a certain frequency range so that they not interfere each other. Also you can pack scene and all its presets and samples to single file. This new feature is very useful for copying scene to another device or backup.

All changes:

● Added new presets.
● Ableton Link start / stop sync.
● Step sequencer for each oscillator.
● Parametric equalizer for each oscillator.
● Signal amplification before filters and EQ.
● Automatic gain control of output for each oscillator.
● Synced Sequencer / LFOs with Ableton Link, IAA, MIDI.
● Pack scene and all its samples / presets to single file.
● Ableton Link SDK 3.0.2 updated.
● Audiobus SDK 3.0.5 updated.
● Built-in description updated.
● Several minor bugs were fixed.

Ratings and Reviews

4.9 out of 5

26 Ratings

26 Ratings

No longer broken

BozoToo

I had previously written a 4-star review of this ap because it is a very creative and innovative approach to sound design. I really LIKED it (just as I have really liked all of the aps by this developer).

HOWEVER ...suddenly my FieldScaper on both my iPads was broken.

I have FieldScaper on two iPads: an iPad 4 running iOS 10 and an iPad Pro 12.9 “ running iOS 11.2.1. On BOTH iPads for reasons unexplainable by modern science, FieldScaper would not load any stored “Scenes” (the combination of audio files and preset effects). When I tried, nothing would change - all of the files and presets remain unchanged regardless of which Scene I tried to load. No one else seems to have had this problem.

The developer tried to solve the problem, but apparently could not duplicate it. Kudos for the effort...

That was THEN this is NOW ...

All that has changed with the latest version. With the 2.0+ releases, this problem has been fixed. I have still lost all my previous presets and all audio files (both factory and my own). But now I can confidently create new materials and actually save them.

The additions in this version are also a great advance and push my opinion of FieldScaper solidly into the five star range. The parametric EQ sequencers (three - one for each “oscilator”) and new synchronizing abilities have elevate FieldScaper beyond its previous status as one of the most innovative music aps available.

Developer Response

Presets and scenes options work as usually without any problems on any iOS. Please read build-in manual which available in the app by button "?" to learn how to use these options. Or you can download PDF manual from app site. Also if you have any questions you can contact directly on app site thru feedback form.

I was wrong with my last review

Shizin

I guess the software was acting weird for a bit when I was trying to make a new track after a long period of artist block, but after a few relaunches of the app everything worked as expected. This is an extremely intuitive app which allows me to create rich and full tones of other worldly origins. Almost every parameter can be modulated with lfo's allowing a generative movement of drones fading in and out, morphing, and decaying. I love this app to death. I am completely satisfied with this purchase after so many year (it's only really been like 2, but still). I hope this app is supported for the years to come.

Hours of fun

gravytop

This is easily one of the most well-thought out, intuitive, and capable noise/music apps I’ve seen. Requests to developer for help have been quickly answered. I, too, hope it is supported in perpetuity.

Information

Seller
Igor Vasiliev
*WEA.AppPages.Size*
15.5 MB
Category
Music
Compatibility
Requires iOS 9.0 or later. Compatible with iPhone, iPad, and iPod touch.
Languages
English
Age Rating
Rated 4+
Copyright
© Igor Vasiliev
Price
$9.99

Supports

  • Family Sharing

    With Family Sharing set up, up to six family members can use this app.

More By This Developer

You May Also Like