Before installing the App, please read the details below as this contains important information about the App.

Connect to Premier 48 - 168, Premier Elite 12 - 640 and Premier International 412 - 832 control panels using your iPhone or iPad.

The App requires a ComIP, ComGSM or Chiron IRIS module connected to a Premier or Premier Elite control panel *

Features include:

Virtual Keypad.
Access your system from the keypad as if you were using a real keypad. Basic Portrait Keypad available on iPhone devices.

Smartkey / Basic Arming
Allows you to arm, part arm, disarm and reset you alarm system. It also allows you to activate up to 3 outputs (control panel dependent) which can be used to control lighting etc. If 'Basic Arming' is enabled, you will be able to activate up to 8 outputs (control panel dependent).

X10 Control
Allows you activate up to 8 X10 devices (control panel dependent) which can be used to control lighting etc.

Event Log.
View up to the last 500 log events. The number of the events to be retrieved is programmable.

Zone Status.
View the status of zones and omit zones.

Panel Status.
View panel type, firmware version, panel voltage and current consumption (control panel dependent).

Send Message
Send a message to the keypads on site.

Anti-code reset. Generate protected UDL passcode.

Site Profiles.
Add and delete an unlimited number of pre-defined site profiles.

Start Screen.
Select which screen the App starts on, Menu, Smartkey,/Arming Keypad, Connect To Site, Cameras or Anti-code.

Push / Email Notifications *
Receive information from your panel regarding its status via push notifications or email. Please note that registration for this service is required and the control panel will need to be programmed by your alarm company in order to send push notifications.

IP Cameras
View and record up to 4 IP cameras. Includes PTZ controls.

Open URL
Pre program up to 4 URL addresses that can be opened at the touch of a button.

Supported Languages.
• Bulgarian
• Czech
• Danish
• Dutch
• English
• Finnish
• French
• Norwegian
• Portuguese
• Slovak
• Spanish
• Swedish

Log In
User Name: Master
Passcode: 123456

Please note that this app has been designed to be used by installation engineers. Access to engineering tools menu which includes Anti-code, Protected UDL generation will only be available once the app is unlocked. To unlock the app, go to setting, help and select 'Unlock App' then follow the instructions on the screen. Unlocking of the app will be allowed for genuine installation engineers only after validation has been performed. A unlock code will not be provided to end users.

The App will still function as an advanced user App if it is not unlocked.

Converting existing Accounts
When selecting the 'New Layout' the app will automatically convert your existing accounts to the new format. If for any reason this does not happen, return to the login screen and proceed as follows. Ensure that the User Name and Password fields contain valid login details and then hold your finger down on the screen underneath the Login button until a message appears to let you know that this has been completed.

Terms and Conditions
The Engineer app (the App) allows you to exercise basic control and run diagnostics of your alarm system including, but not limited to, arming, part arming, disarming and resetting your alarm system. These terms and conditions relate to the App and govern your use of the App with Texecom Limited (Us, Our, We, or Texecom). Details of these terms and conditions can be found by clicking on link to the 'Marketing URL'. By downloading the App you agree to be bound by these terms and conditions.

To ensure the very best user experience, please make sure your control panel has the latest firmware.

* Push notifications can only be sent using Texecom communication modules.

What's New


Fixed issue with disclaimer not showing on iOS9.
Fixed Contact Texecom email not working.
Swapping protocols no longer disconnects.
Fixed issue with new push account number not being displayed.
Fized zone omit not working.
Fixed event log not always showing.

Ratings and Reviews

Does what it says on the tin...


It isn't flash, but it's functional. Push notifications can be temperamental, great to view logs and set / unset.

Broken App with last update


The last update has broken some of the functionality of the App. I've been happily using the App to control the 24 hour zones on my sheds using the omit buttons in the 'zone status' section, since the last update this no longer works. Texecom have acknowledged the issue and have advised the developers of the issue, how long this will take though is anyone's guess, for now my once working system via the App is now broken and not fit for purpose.

Long awaited


If you work with Texecom panels this is an invaluable suite of tools for both onsite and remote use. Best functionality with the Elite range of panels, backward compatibility with older panels may be limited but Tech support are always extremely helpful and do everything they can to resolve issues.


Texecom Ltd.
19.9 MB
Requires iOS 7.0 or later. Compatible with iPhone, iPad and iPod touch.
English, Bulgarian, Czech, Danish, Dutch, Finnish, French, German, Hungarian, Italian, Norwegian Bokmål, Portuguese, Slovak, Spanish, Swedish, Turkish
Age Rating
Rated 4+
© 2013 Texecom Limited


  • Family Sharing

    Up to six family members will be able to use this app with Family Sharing enabled.

More By This Developer

You May Also Like