Снимки экрана


iCircuit is the premier iPad and iPhone app for designing and experimenting with circuits. Its advanced simulation engine can handle both analog and digital circuits and features realtime always-on analysis. It is the perfect companion to students, hobbyists, and engineers.

You use it as you would any CAD program: you add elements, connect them together, and set their properties.

But iCircuit is unlike other CAD programs because it is always simulating. It's just like working with the real circuit. You do not stop to take a measurement or spend a lot of time configuring reports. Instead, you just play with the circuit as you normally would, with the power on!

There are over 30 elements you can use to build your circuits. The app has everything from a programmable Arduino, to simple resistors, to switches, to MOSFETS, to digital gates.

The app features a multimeter that you use to probe around the circuit to instantly read voltages and currents. If you want to see how a value changes over time, then you can add values to the built-in oscilloscope. The scope can simultaneously track many signals over time and features a touch interface to control the total time displayed and stacked and unstacked modes to easily compare signals.

Supported elements include:

• Programmable Arduino
• Signal generators, Voltage sources, Current sources, and Dependent sources
• Resistors, Capacitors, and Inductors
• Manual SPST/SPDT Switches, Push buttons, and Relays
• Diodes, BJ Transistors, and MOSFETs
• Speakers, Microphones, Buzzers, DC Motors, and LEDs
• ADCs, and DACs
• Logic gates: AND, OR, NAND, NOR, XOR
• JK and D Flip-flops
• 38 7400 series digital parts
• 78xx and LM317 voltage regulators
• 7-segment display and driver
• Antenna with simulated AM and FM signals

You can also create sub circuits to introduce new elements and componentize your designs.

No matter your skill set, you'll be playing with circuits in no time with iCircuit.

Что нового

Версия 1.9

* All new *programmable* Arduino element (only basic programming is supported now, more on the way!)
* Added LM317 and Fuse elements
* Updated for iPhone X

Оценки и отзывы

4 из 5

Оценок: 7

Оценок: 7


Гуидо куилер

Добавьте Русский язык поставлю 7

Слишком много недоработок


Жалею что купил. Постоянные ошибки в интерефейсе программы и в работе симулятора - пользоваться просто невозможно!

Need to fix and add necessary functionality


We need to rotate elements. We need a 'delete selected element' button on bar rather than on pop up menu. Selecting of wire must be smarter: all parts of wire between two elements must be selected at once even they have corners and connectors to other wires.

You should fix situations, when scheme scrolling occasionally disables, when new elements bar become partially visible.


Krueger Systems, Inc.
91.8 МБ
Требуется iOS 9.0 или более поздняя версия. Совместимо с iPhone, iPad и iPod touch.
Возраст: 4+
© 2010-2018 Krueger Systems, Inc.
749 р.


  • Семейный доступ

    С помощью семейного доступа приложением смогут пользоваться до шести участников «Семьи».

Другие приложения этого разработчика

Вам может понравиться