BalancePro for Field Balancing 4+

BalancePro is a technical tool to assist the in-site single and two-plane rotor balancing procedure. A full accelerometer, phase sensor and DAQ box is needed for vibration readings. (inquire at GTI Predictive Technology)

BalancePro for Field Balancing features the following methods and tests:
- Single Plane Balancing using 4-Runs method
- Single Plane Inboard Balancing using Vector method
- Single Plane Overhung Balancing using Vector method
- Two-Plane Inboard Balancing using Influence Coefficient method
- Two-Plane Overhung Balancing
- Residual Imbalance Test:

Main features:
1. Manual data entry and direct data acquisition
2. Real-time spectrum popover
3. Real-time polar plot and auto amplitude adjust for all vectors
4. Threshold auto area display in polar plot
5. Remove material (drill) popover
6. Data and settings are stored instantaneously
7. Clockwise and Counter-Clockwise shaft rotation selector
8. Metric and Imperial Units
9. Vibration amplitude in ips, mm/s and mils
10. Report