MiMiX - Mixer for Audiobus
This app is only available on the App Store for iOS devices.
With MiMiX You can take total control of mixing of Your favorite Audiobus enabled apps’ outputs in the most convenient way. Just insert MiMiX into the Output Slot of Audiobus, even into multiple chains to mix the sound of the connected input or effect apps. You can even insert MiMIX into the input slot to send the mix or any of the ports to an other app, like a DAW to record the mix.
- Mix up to 8 Audiobus enabled apps including the system input or multiple channels of a multichannel input hardware
- Send any of the ports to another Audiobus lane for multitrack recording or send FX
- Set the main mix volume level between -INF and +12dB
- Set the volume level of each input port between -INF and +12dB
- Set the panning or balance of each port (selectable)
- Mute any port
- Set any port to solo or several port in multi-solo mode
- Monitor any port or the main mix on the built-in oscilloscopes and VU meters
- Control the main mix volume and volume, balance, mute and solo for each port using a MIDI controller or a Core MIDI app
- Control the main mix volume and volume, mute and solo for each port using Audiobus Remote on a second iOS device
- Set the MIDI CC parameters of each control via MIDI learn
- Change the MIDI settings in-app
- Double-tap on each knob or slider to set its default value
- Check the saturation indicator for each port to check if the pots power reached 0dB
- Check the clip indicator on the main mix to avoid clipping.
- MiMiX supports Audiobus state saving feature
- MiMiX supports multi-output hardware devices, up to 12 stereo pairs
- MiMiX uses a 32 bit float engine so clipping can only occur at the main mix
- MiMiX is lightweight - minimal CPU usage and memory footprint
Check the preview video at: http://youtu.be/AWOKueL3Y34
Check the user manual at: http://ttrgames.hu/mimix/mimix_manual.pdf
Compatible with iPad2 and newer. Requires iOS8 or newer and Audiobus 2 or 3. Fully iOS10 compatible.
What's New in Version 2.3
Audiobus 3 compatibility.
Please be aware that Audiobus 3 combines the output of the apps in the input slots of the same pipeline, so MiMiX will only get the combined output of these apps. Please use a separate pipeline for each input app to have individual control.
Allows me to set up various apps for live performance. Adjust volume for each one and use solo/mute buttons to move through the apps. It's like having my eight favorite presets at my fingertips. I just wish the solo and mute buttons were a bit larger.