The Zone Control app allows for the monitoring and controlling of Mitsubishi Electric Cooling & Heating systems. This level of access can be utilized by building or campus managers, maintenance personnel, building owners and homeowners to name a few.
Zone Control can control CITY MULTI® and M- and P-Series systems connected to the M-NET and controlled from one of Mitsubishi Electric's Central Controllers, AE-200, AE-50, AG- 150, EB-50, GB-50, GB-50ADA, or GB-24. The iPhone or iPod Touch's Wi-Fi connection allows Zone Control to communicate to the central controller across a Local Area Network (LAN). Network settings may vary from locations so check with your administrator for any login information that might be needed to access the LAN.
Each indoor unit can be monitored and controlled in terms of:
•Space temperature (monitor only)
Zone Control is configured through menu-driven settings that support the following:
•Multiple controllers per location
•Customizable names for indoors units
(setup may need to be done with support from the installing contractor to create the network access point or assign the indoor unit location names)
Note: You must press the ‘Refresh” button when you are viewing the controllers to update the indoor unit’s settings.
1. Updated for iOS 9
Ratings and Reviews
Great potential- wish someone would fix
There are some easy fixes here, as the previous reviewer has noted. Mitsubishi has made 70% of the effort; 80% would make this a great app and a real boon to us ag-150 users. I hope someone is listening.
This app was impossible to configure without assistance from Mitsubishi over the phone. Very counter-intuitive. Using it with the AG-150 and it’s working… sort of.
Sometimes the app gets out of sync with the AG-150 and that can be very frustrating because there is no way to tell they are out of sync because it doesn’t give an error or correct itself.
In addition there is no way to tell when the units are actually running (i.e.: cooling or heating) you can only tell if they are set to run. So if the set temp is 72 and the room temp is 74 the UI doesn’t show anything differently than if the set them is 72 and the room temp is 60… this is unfortunate because the multi-citi hardware is variable speed compressor/coolant and fan… lots of opportunity to show how things are running but they haven’t done it.
Also would be useful to see historical data.
Lots of opportunity but clearly no one is updating this software. :(
This App is very poorly written. No help is available. It is not intuitive. Once the controller IP setting is entered, the Locations command should be responsive, but it gives absolutely no feedback. It is impossible to know whether the application is alive or dead, whether there is a configuration error and what it might be. The Group names should not have to be re-entered if they have been previously entered from a browser on a PC. Totally clumsy and dumb.
With Family Sharing set up, up to six family members can use this app.