Use the free mydlink™ Home app to control and monitor all your mydlink connected home devices with your smartphone or tablet. With its intuitive user interface, you can instantly see the status of all your mydlink connected home products and set up rules for interaction between multiple devices, such as PIR motion sensors and smart plugs or window sensors and sirens. You can turn lights and other devices on and off remotely with the tap of a button or with simple voice commands using Amazon Echo. The mydlink connected home devices are also compatible with IFTTT (If This Then That), so you can pair these devices with other IFTTT-enabled products and associated apps to customize your smart home even further.

This app is compatible with the following models: DSP-W110, DSP-W215, DCH-S150, DCH-S160, DCH-S220, DCH-G020, DCH-Z110, DCH-Z120, DCH-Z310, DCH-Z510, DCH-107KT, DCH-T100KT, DCH-201KT, DCS-935L, DCS-5010L,DCS-5025L, DCS-935LH, DCS-8200LH and DCS-8330LH.

This app is not compatible with other D-Link Cloud cameras, routers and storage. Please refer to the mydlink Lite app for a listing of these other products.

What's New

Version 3.0.8

Change signature

Ratings and Reviews

2 out of 5

81 Ratings

81 Ratings

Worst automation app in my home


Other home automation devices, and their apps, give plenty of feedback and testing. This device (water sensor) and its app took 4 valuable hr to install, in contrast to 15 min for the other automation devices/apps. Worst of all, the app tells us no way to test whether the device is working--without dousing it. Next, took three tries to connect to wifi, even though I connected while 1 meter from router. Next: app won't run in portrait, and had to spend more valuable time learning that. Your typical homeowner installs automation to save time. This device, and this app, do the opposite. Despite wirecutter opinion.

Hoping to exploit previous knowledge, I got, and connected, a second copy of the same device, in a different location. Same connection woes, both wps and manual. Total time: 1.5 h, mostly because of drastically limited expectations.

Useful for simple automation


version 3.0.7 is working without trouble for me. I just have a few DSP-W110 outlets. I use them for simple schedules. They are reliable, and don't lose their minds if they are without AC power for awhile. I wish there was an API so I could drive these with my own programs though.

my old reviews:

The 2.0.1 update crashed on launch repeatedly. I deleted the app, re-downloaded, signed in again, and now it runs.

I connected 2 of the simpler DSP-W110, and talked to them using iOS 6 and iOS 8. WPS installation was flaky, but that's the fault of Apple's Airport Utility. Manual setup worked fine. In both cases, this app walked me through it. On and Off responded in under a second.

Worthless junk


Someone bought me a switch as a gift. I was going to return it, but it was too late. So I figured I’d try it. It doesn’t work with my automation system at all. I had to link it directly to Alexa. The app UI and programming features are awful. And recently, it stopped working. I had to repair it, and when I try to set it up (WPS and manual), it tells me “incorrect pin”. It didn’t even prompt me for a pin, and after retrying and putting in the pin, it still does the same thing. On the plus side, it’s easy to disassemble and replace the WiFi module with something like an Arduino.


D-Link Corporation
115.8 MB
Requires iOS 7.0 or later. Compatible with iPhone, iPad, and iPod touch. Apple TV.
English, Czech, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese
Age Rating
Rated 4+
© 2017 D-Link Coroporation


  • Family Sharing

    With Family Sharing set up, up to six family members can use this app.

More By This Developer

You May Also Like