The Trane Tracer™ BAS Operator Suite mobile app has all that you need to check your building’s Tracer SC HVAC system to see what’s happening, to respond to hot/cold calls quickly and get more done in your day.
Your building, at your fingertips.
The Tracer BAS Operator Suite works with the Trane building automation system controller: Tracer SC version 3.6 and higher. The BAS suite is fully integrated with Tracer SC – just log in to view your building!
The Trane BAS Operator Suite Features:
•See the active and historic alarms in your system, their severity and what generated the alarms.
•Acknowledge new alarms and add comments for others to see
•Keep the alarm log tidy with the delete alarm functionality
•See what’s happening in spaces, with equipment and entire systems.
•Built-in graphics for easy to read status, at a glance, including animations.
•Respond to hot/cold calls by adjusting setpoints, overriding equipment and occupancy.
Updates to support SCs, versions prior to 4.3
Graphics List loads all relevant graphics
Ratings and Reviews
Needs an update
The app for the most part works. There are a few tweaks I recommend. When I select one of the space units to adjust something the screen refreshes back to the top of the list. I would like if it went back to where I left off so I don't have to scroll down the list again. I have a very large list. Another thing is I can't make any adjustments other than occupancy status and temp for space units. When I use the Tracer SC on my computer I can adjust a lot more. It would be nice to do the same with this app. Lastly I can't make any adjustments to air handlers at all from the app. I would like to have that freedom as with the Tracer SC interface.
App is getting better
The app is getting better with every update. Keep up the good work. Please listen to the comments below. Scheduling update is a huge step in the right direction. I would ask for notifications in some of the upcoming releases. Also the ability to enable and disable thumbwheels with a click of a check box. Keep up the good work
New 2.0 version does not allow changing set points on RTU
Before version 2.0, I was able to change the set points of the RTUs we have listed under the “Equipment” page, but can no longer do this.
Please add this function/feature back as it is critical for me to keep my building at the correct temperature throughout the year.
With Family Sharing set up, up to six family members can use this app.